NEUROTRAC Replacement Lead

Replacement Leads for Neurotrac TENS & EMS Machines            

On occassion the leads to your tens machine will need replacing.  If your Tens is not functioning as it usually does, then the chances are you may need to replace your lead or leads.  Ensuring that the lead wires do not come under unneccessary tension can prolong their life.  Try to minimise 'stretch' that can be caused by the unit becoming unsecured from your belt and dropping.  The wires are of a lightweight nature and can become damaged if adequate care is not taken to protect them.  Never remove your lead wires from your Tens machine by pulling on the wire itself. Always hold firmly by the plastic plug and/or pin fitting when removing from your unit and electrodes.

Suitable for all Neurotrac TENS & EMS units.

REMEMBER:

• Never remove lead wires by pulling whilst holding wire alone
  
• Never over-stretch the wire by dropping your unit
  
• Never try to repair a lead wire yourself as you will diminish the function of your Tens Unit
  
• Try not to kink the lead wire unnecessarily
  
• Always hold the socket or pin cover when removing lead wires from your Tens unit or electrodes
  
• Keep a spare wire on hand for emergency occassions
  

Following these simple guidelines will ensure you get the most from your Tens Therapy

Sold Separately but twin packs are available.